home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.graphics.animation
- Path: sparky!uunet!digex.com!intercon!udel!bogus.sura.net!darwin.sura.net!sgiblab!a2i!jonathan
- From: jonathan@rahul.net (Jonathan Heiliger)
- Subject: Re: Matrox Studio
- Message-ID: <C1Ix6H.BB2@rahul.net>
- Sender: news@rahul.net (Usenet News)
- Nntp-Posting-Host: bolero
- Reply-To: jonathan@mecca.epri.com
- Organization: Electric Power Research Institute
- X-Newsreader: TIN [version 1.1 PL8]
- References: <ksPPXB3w165w@gilligan.tsoft.net>
- Date: Wed, 27 Jan 1993 17:42:16 GMT
- Lines: 21
-
- Jerry Lee (bbs.mirage@gilligan.tsoft.net) wrote:
- > nowinski@sciborg.uwaterloo.ca (Andrew Nowinski) writes:
-
- > Well.. the Video toaster can't compare with the Matrox. The Toaster for
- > one thing can't control any devices such as recorders. The quality
-
- Technically it can. It must be connected to an editor that supports a GPI
- interface, which I believe is the same thing for Matrox.
-
- > address to the company as soon as possible.. (by Monday for sure). All I
- > know right now is that they are located in Canada and it costs around
- > $20K; the key word is around since the actual system that we have at
- > school cost more around $25-30K.
-
- Depending on configuration, it will run you approximately $15k.
-
- --
- Jonathan Heiliger .... Electric Power Research Institute
- Internet: jonathan@mecca.epri.com -/- jonathan@rahul.net
- Telephone <*> [415].855.2888
-
-