home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.dcom.isdn
- Path: sparky!uunet!ukma!gatech!udel!intercon!psinntp!adcmail!bcapps
- From: bcapps@atlastele.com (Brent Capps)
- Subject: Re: 23B+D (PBX) & 2B+D (Home)
- Message-ID: <1993Jan15.170510.12264@atlastele.com>
- Organization: Atlas Telecom Inc.
- References: <C0n63t.GBM@norstan.com>
- Date: Fri, 15 Jan 1993 17:05:10 GMT
- Lines: 18
-
- In article <C0n63t.GBM@norstan.com> sfrazier@norstan.com (Superuser) writes:
- >Would the following work?
- >
- >Install a 23B+D T1 into an ISDN compatible PBX from the local Telco.
- >From the local telco install 23 2B+D to 23 individual homes.
- >
- >The pbx would supply the "dial tone", if you will, the phone number would
- >be a DID on the PBX. The individuals could wwork out of their home. All
- >23 people could make and receive calls at the same time due to a 1:1 ratio.
-
- You wouldn't want to make the T1 23B+D to do this -- too many muxing
- problems. Instead, you'd want to order the T1 to run ESF/B8ZS, DACS
- out the DS0s to _24_ residences as leased lines and drive each DS0
- as a BRI OPX on the PBX.
- --
- Brent Capps |
- bcapps@agora.rain.com (gay stuff) | Quis corriget correctores ipsos?
- bcapps@atlastele.com (telecom stuff) |
-