home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!gatech!concert!duke!wolves!cssnet!wplace!mlewis
- From: mlewis@wplace.UUCP (Mark Lewis)
- Newsgroups: comp.bbs.waffle
- Subject: Re: MODEM barf
- Message-ID: <90BwXB1w165w@wplace.UUCP>
- Date: 24 Jan 93 19:35:43 GMT
- References: <42779@unix.SRI.COM>
- Reply-To: mlewis%wplace@cssnet.UUCP
- Organization: The Waffle House, Waldo's Place USA
- Lines: 32
-
-
- shimizu@unix.SRI.COM (Dan Shimizu) writes:
- > made, but then the Twincomm sends "CARRIER 14400", and I think WAFFLE
- > expects "CONNECT". Not seeing connect, WAFFLE reports MODEM barfed, and
-
- check into the W setting (NOT the &W setting) and/or the S45 register (i
- think i got the right register...) it's a bitmapped register and you
- definately want bits 0 and 1 ON (ie: S45=3) ...
-
- either one of the above generally makes Hayes compatible modes return
-
- CONNECT <speed>[/ARQ]
-
- where [/ARQ] is only presented on error correcting connections...
-
- your modem is probably returning a multiline connect message similar
- to...
-
- CARRIER <blah>
-
- PROTOCOL <blah>
-
- CONNECT <locked port rate>
-
- this style you do NOT want... you want to use the one listed above...
-
- hope it helps...
-
- <--------- * DA-CON Consultants - Creating Solutions since 1985 * --------->
- UUCP ~!duke!wolves!cssnet!wplace!mlewis
- USENet->FIDONet Mark.Lewis@f12.n3634.z1.fidonet.org
- The Company, The Words, The Thoughts, and The System are all mine...
-