home *** CD-ROM | disk | FTP | other *** search
- Comments: Gated by NETNEWS@AUVM.AMERICAN.EDU
- Path: sparky!uunet!haven.umd.edu!darwin.sura.net!bogus.sura.net!howland.reston.ans.net!paladin.american.edu!auvm!AIS.ORG!KELSON
- Return-Path: <@OHSTVMA.ACS.OHIO-STATE.EDU:kelson@ais.org>
- X-Mailer: ELM [version 2.4 PL20]
- Content-Type: text
- Content-Length: 586
- Message-ID: <m0nHdmw-000A9tC@ais.org>
- Newsgroups: alt.cad.autocad
- Date: Thu, 28 Jan 1993 13:16:29 -0500
- Sender: AUTOCAD Autocad Discussion List <AUTOCAD@OHSTVMA.BITNET>
- From: David Lewis <kelson@AIS.ORG>
- Subject: Re: Summagraphics 1201 vs Release 12
- In-Reply-To: <m0nHUt3-000A7yC@ais.org> from "Eric Nilson" at Jan 25,
- 93 02:39:46 pm
- Lines: 14
-
- > I had the same types of problems (except "analog circuitry failure" ??).
- >
- > Summagraphics did update their drivers. Now recommending using their ADI
- > driver instead of the Autocad driver. Might be worth a try.
- >
- > One thing I noticed with the new Summagraphics ADI driver: the response to
- > pressing the pick button seems slower, it sometimes misses and you have to
- > press it again.
- >
-
-
- I had this problem, I actually switched to a driver for my seiko
- tablets that works on the summagraphics.. and it performed better
- and cleared up the pressing of the pick button problem
-