home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!dtix!darwin.sura.net!paladin.american.edu!auvm!CICESE.MX!PGONZALE
- From: pgonzale@CICESE.MX (Paulo Gonzalez Otero)
- Newsgroups: alt.cad.autocad
- Subject: Re: epson lq-510 printing..HELPPP!!!!
- Message-ID: <9301241451.AA05873@geofisicas.cicese.mx>
- Date: 24 Jan 93 14:51:50 GMT
- Sender: AUTOCAD Autocad Discussion List <AUTOCAD@OHSTVMA.BITNET>
- Lines: 23
- Comments: Gated by NETNEWS@AUVM.AMERICAN.EDU
- Return-Path: <@OHSTVMA.ACS.OHIO-STATE.EDU:pgonzale@cicese.mx>
-
- Hello!
-
- In response to
-
- I am having problems printing to a epson LQ-510 using AutoCAD 10.0.
- I just checked the configuration, and looks like version 10. does not
- support epson LQ-510. I can configure for LQ-286 or some other epson
- printers but the scaled printout comes out to be unscaled.
-
-
- You could try to adjust the print ratio, you can do that when you configure
- the printer, it will ask you for the measured x y dimension and the "REAL" x y
- dimensions. Another thing you could try is fiddle with the DIP switches of your
- printer to set it to emulate a IBM graphics printer, and set up AUTOCAD to use
- a IBM graphics printer, this has bail me out of some situations, it may work
- for you. If any trouble you can reach me at pgonzale@cicese.mx
-
-
-
- Paulo Gonzalez Otero
- Earth Sciencies Department
- CICESE
- Internet: pgonzale@cicese.mx
-