home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!haven.umd.edu!darwin.sura.net!bogus.sura.net!howland.reston.ans.net!usc!news.service.uci.edu!unogate!mvb.saic.com!info-multinet
- From: adelman@TGV.COM (Kenneth Adelman)
- Newsgroups: vmsnet.networks.tcp-ip.multinet
- Subject: Re: help w/acc boards
- Message-ID: <930111143011.21000119@TGV.COM>
- Date: Mon, 11 Jan 93 14:30:11 PST
- Organization: Info-Multinet<==>Vmsnet.Networks.Tcp-Ip.Multinet Gateway
- X-Gateway-Source-Info: Mailing List
- Lines: 29
-
- > Anybody out there got experience setting up acc boards for HDLC and x.25?
-
- > I'm trying to set up IP over HDLC on a point-to-point circuit with some ACC
- > 5100/6100 boards in a uVAX and an 8600 respectively. (Don't ask why, I just
- > work here sometimes). The uVAX acc board comes up fine and will successfully
- > loopback (internal and external). I can ping, FTP, and telnet to it. The 8600
- > set up does not. Same version of MultiNet on both systems, 3.1(X) I get the
- > following error setting up either internal or external loopback on the 8600:
-
- > DSTL86> mu ping 195.200.200.2
- > PING 195.200.200.2 (195.200.200.2): 56 data bytes
- > sendto: %MULTINET-F-ENOBUFS, No buffer space available
- > MULTINET_PING: wrote 195.200.200.2 64 chars, ret=-1
- > sendto: %MULTINET-F-ENOBUFS, No buffer space available
- > MULTINET_PING: wrote 195.200.200.2 64 chars, ret=-1
- > sendto: %MULTINET-F-ENOBUFS, No buffer space available
- > .
- > .
- > etc
- > .
-
- > ENOBUFS...what buffers where and what do I tweak?
-
- Check to be sure that $ MULTINET SHOW/BUFFER doesn't report a
- problem with "requests for memory denied". If it does not, then the
- problem is the ACC card not accepting packets for transmission. No idea
- why it wouldn't do this.
-
- Ken
-