home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: sci.electronics
- Path: sparky!uunet!mcsun!chsun!bernina!stettbac
- From: stettbac@isi.ethz.ch (Daniel Mueller)
- Subject: Re: EPROM programming info.
- Message-ID: <1993Jan11.165157.27506@bernina.ethz.ch>
- Sender: news@bernina.ethz.ch (USENET News System)
- Organization: Swiss Federal Institute of Technology (ETH), Zurich, CH
- X-Newsreader: TIN [version 1.1 PL8]
- References: <1993Jan8.144544.4162@sbctri.sbc.com>
- Date: Mon, 11 Jan 1993 16:51:57 GMT
- Lines: 18
-
- Tom. Adams 529-7860 (tadams@sbctri.sbc.com) wrote:
- :
- : Are all, say, 2764's programmed the same or do different manufacturers
- : use different times and voltages? Where can I find out more about this?
- : --
-
- Hi Tom
-
- You should expect different programming voltages; the optimal timing
- may also be different. But don't worry about that too much with your
- programmer. The programming may take a little longer (if puls prog.
- mode is used) but you'll get your EPROM ..
-
- Anyway, you will find all details in the data books.
-
-
- juerg at ethz switzerland
-
-