home *** CD-ROM | disk | FTP | other *** search
/ NetNews Usenet Archive 1993 #1 / NN_1993_1.iso / spool / sci / electron / 21983 < prev    next >
Encoding:
Internet Message Format  |  1993-01-05  |  729 b 
  1. From: tgg@otter.hpl.hp.com (Tom Gardner)
  2. Date: Tue, 5 Jan 1993 10:51:07 GMT
  3. Subject: Re: Good way to prototype analog circuits?
  4. Message-ID: <72020032@otter.hpl.hp.com>
  5. Organization: Hewlett-Packard Laboratories, Bristol, UK.
  6. Path: sparky!uunet!usc!sdd.hp.com!hpscit.sc.hp.com!hplextra!otter.hpl.hp.com!otter!tgg
  7. Newsgroups: sci.electronics
  8. References: <1993Jan3.231733.15225@ee.ubc.ca>
  9. Lines: 8
  10.  
  11. For RF:
  12.     - stick the chips upside down on a ground plane and solder
  13.      components directly to the leads
  14.     - for controlled impedance lines you can purchase long narrow 
  15.       bits of pcb with a thin track (whose width defines the impedance)
  16.       on one side and self adhesive backing on the other. Simply stick this
  17.       to the ground plane
  18.  
  19.