home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: rec.models.rc
- Path: sparky!uunet!iphase.com!iex!usenet
- From: djones@iex.iex.com
- Subject: Re: Building Board
- Message-ID: <1993Jan8.183903.16272@iex.uucp>
- Sender: usenet@iex.uucp (USENET news)
- Organization: IEX Corporation Inc.
- References: <C0Htu5.Dp2@csn.org>
- Date: Fri, 8 Jan 1993 18:39:03 GMT
- Lines: 26
-
- In article <C0Htu5.Dp2@csn.org> eeak@teal.csn.org (Ed Krejcik) writes:
- >Here's a new thread that should start some lively conversation...
- >
- >What do you all use for a building board? I'm going on
- >building my third plane now and I'm planning on putting
- >together a more robust build board. Any ideas?
-
- A hollow core door is a pretty good choice if you have space
- for it. Cover with ceiling tiles or Homosote (sp?).
-
- For my board I built a frame of 1x3 poplar to which I attached
- a piece of 5/8" particle board. Over this I use a ceiling tile. Gives
- me a 2'x 4' area in which to work. Very flat. And was pretty cheap
- to put together.
-
- I have also heard that glass make a good board.
-
- Doug
- ------------------------------------------------------------------
- 'I am a traveler of | Douglas R. Jones
- both Time and Space' | IEX Corporation
- Led Zeppelin | (214)612-2600 ext: 325
- | djones@iex.iex.com
- | uunet!iex!djones
- -------------------------------------------------------------------
-
-