home *** CD-ROM | disk | FTP | other *** search
Wrap
Path: sparky!uunet!cis.ohio-state.edu!magnus.acs.ohio-state.edu!usenet.ins.cwru.edu!agate!ames!sun-barr!male.EBay.Sun.COM!zacson4!dloyer From: dloyer@zacson4.EBay.Sun.COM (Dennis Loyer) Newsgroups: rec.autos.tech Subject: Re: Leaking brake fluid. How to find leak Date: 8 Jan 1993 23:18:06 GMT Organization: Sun Microsystems, Inc. Lines: 24 Distribution: world Message-ID: <1il23eINN2qf@male.EBay.Sun.COM> References: <1il1vjINN2qf@male.EBay.Sun.COM> Reply-To: dloyer@zacson4.EBay.Sun.COM NNTP-Posting-Host: zacson4.ebay.sun.com In article 1il1vjINN2qf@male.EBay.Sun.COM, dloyer@zacson4.EBay.Sun.COM (Dennis Loyer) writes: > In article 3787@magnus.acs.ohio-state.edu, sorlin@magnus.acs.ohio-state.edu (Steven J Orlin) writes: > > In article <ahusain.41@comm1> ahusain@comm1 (Asad Husain) writes: > > >Hi there. > > > > > >I seem to have a leak in my brake system. Every 2 weeks I have to fill up > > >my master cylinder with brake fluid. What can I do to find where the leak > > >is. I have tried to look for obvious leaks but can't find any. > > > > > Check the brake calipers and rear brake cylinders, any rubber line and any > > metal line that runs right underneath the car, by the frame or axle. > > -- > > "Nobody tells a Navy man when he's had enough to drink, cause only a Navy man > > knows when he's had enough to drink!" > > -Steven J Orlin sorlin@magnus.acs.ohio-state.edu /\/\/\/\/\/\/\/\/\/\/\/\/ > > > Worse yet is raw linseed oil, I had this done to me, when introduced into the combustion chamber, the oil breaks down into a resin. This resin literally glued > the pistons to the cylinder walls in my engine, causing a lot of damage which > forced me to replace the complete engine, not very fun or cheap. > OOPS!!!! this should have been posted under RE: Sugar in gas.