home *** CD-ROM | disk | FTP | other *** search
- From: karen@misty.boeing.com (Karen Robinson)
- Date: Fri, 8 Jan 1993 21:12:16 GMT
- Subject: Re: Wood vs. Presto-type logs
- Message-ID: <96900004@misty.boeing.com>
- Organization: Boeing Commercial Airplane BCS Support
- Path: sparky!uunet!bcstec!misty!karen
- Newsgroups: misc.consumers
- References: <1993Jan5.223159.29046@ide.com>
- Lines: 32
-
- We have a heat pump, but supplement it with our free-standing wood stove.
-
- Since cord-wood is "free" to us on our treed acerage (mostly blow-downs),
- we use that for our fuel in the wood stove. We usually bank the fire
- before going to bed, which lasts a few hours. In normal weather conditions
- (not too cold) the heat pump will then come on in the early morning and
- only have to reheat a little, and not use the backup electric resistance
- heating.
-
- But in colder conditions (like now, here in Seattle area), I like to
- put a presto-log on before going to bed. By damping the stove down,
- there will still be a small amount of coals left in the morning.
- Otherwise the heat pump would be coming on with backup heat (very
- expensive).
-
- I also use the presto logs sometimes when the power goes out overnight,
- since the wood stove then becomes the sole heat source. A couple of
- damped down presto-logs will only need checking every three hours or so.
- Regular wood needs to be checked at least once per hour.
-
- Yes, the presto-log packages say you should only burn one log at a
- time. And some wood stoves should not burn them at all,
- due to the hotter temperatures (see your owners book). Since my stove
- is custom built of 5/8" steel and has a 36'x24' firebox, two presto's
- work fine.
-
- BTW, you can get presto-logs in bulk (by the pallet if you want!) at
- farm and feed stores sometimes. At least you can here in the great
- Pacific Northwest
-
- Karen Robinson
-
-