home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky comp.unix.sys5.r4:1211 comp.unix.questions:15389 biz.comp.telebit.netblazer:25 comp.protocols.tcp-ip:5902
- Newsgroups: comp.unix.sys5.r4,comp.unix.questions,biz.comp.telebit.netblazer,comp.protocols.tcp-ip
- Path: sparky!uunet!caen!destroyer!Tygra.Michigan.COM!jp
- From: jp@tygra.Michigan.COM (John Palmer)
- Subject: Re: Netblazer
- Organization: CAT-TALK Conferencing System
- Date: Sun, 10 Jan 1993 14:22:47 GMT
- Message-ID: <1993Jan10.142249.5913jp@tygra.Michigan.COM>
- References: <1993Jan07.224637.4538@xenitec.on.ca> <C0JFMF.4nu@ddsw1.mcs.com> <C0JL0L.HEx@news.rn.com>
- Lines: 25
-
- In article <C0JL0L.HEx@news.rn.com> larry@news.rn.com (Larry Snyder) writes:
- "karl@ddsw1.mcs.com (Karl Denninger) writes:
- "
- ">>>Can the NB support 2 56700 baud modems going full blast on the
- ">>>stock 2 serial ports on the motherboard?
- ">>
- ">>try pulling the case off and seeing of the UARTs are 16550's.
- ">>
- ">>i would suspect so.
- "
- ">They certainly are. (I have examined lots of these)
- "
- "So one can assume they support the FIFO to get those speeds.
- "
-
- The best bet in using the Netblazer for dialup IP is to ignore the first
- two ports as they are built into the board and are standard AT serial
- ports. The 8-port cards are Digiboard PC/8e's. You can take one out of
- the box and plug it into your Netblazer and it will work fine. There are
- instructions in the Netblazer manual on how to set the dip switches.
- --
- Its most likely a | E-MAIL: jp@michigan.com CAT-TALK IS BACK as a FREE
- forgery, so save your | SYSTEM!! 313-882-2209 300-14400 V.32/V.32BIS/TurboPEP
- flames for someone | Anon-UUCP: System: tygra, Login: nuucp, no pw
- who cares :-> | Get file "/cat/pub/filelist" for a list of files.
-