home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.unix.bsd
- Path: sparky!uunet!gatech!usenet.ins.cwru.edu!agate!tfs.com!tfs.com!julian
- From: julian@tfs.com (Julian Elischer)
- Subject: Re: questions of scsi tape driver.
- Message-ID: <1993Jan6.193746.2479@tfs.com>
- Organization: TRW Financial Systems
- References: <1993Jan3.003448.2389@netcom.com>
- Date: Wed, 6 Jan 1993 19:37:46 GMT
- Lines: 40
-
- In article <1993Jan3.003448.2389@netcom.com> shawr@netcom.com (rich shaw) writes:
- >Recently I bought a used tandberg TDC3640 scsi tape drive. I think it's
- >a QIC150 drive. This drive works fine under dos (I am using aspitar).
- >But when I boot 386bsd with julian's scsi drivers(Thanks julian), there
- >seem to be some problems recognize or initialize the drive. Below are
- >the messages on the screen.
- >
- >dev4,lu0: tape1 (sequential), removable 'unknownunknown????' SCSI0
- > st0: scsi tape drive:0 blocks of 512 bytes
-
- wow a really old device... almost SASI not scsi!
- >cmd fail
- >cmd fail
- >...
- >
- >After I compiled with scsi_debug set to 1, I got the following message.
- >
- >aha_scsi_cmd <ccb0(0x23) cmd fail
- >aha_done ccb0(0x33)> ccb0(0x23)> ahaintr scsi error rval=3
- >code from driver 0x2
-
- unfortunatly I need more information..
- the scsi_debug word has many bits, each of which specify different debugging:\
- set it to -1 for more info..
-
- thanks
- >
- >-- rich
- >-- shawr@netcom.com
- >
- julian
- +----------------------------------+ ______ _ __
- | __--_|\ Julian Elischer | \ U \/ / On assignment
- | / \ julian@tfs.com +------>x USA \ in a very strange
- | ( OZ ) 2118 Milvia st. Berkeley CA. \___ ___ | country !
- +- X_.---._/ USA+(510) 704-3137(wk) \_/ \\
- v
-
-
-
-