home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!cs.utexas.edu!wupost!waikato.ac.nz!comp.vuw.ac.nz!grace.cri.nz!olof.auck.irl.cri.nz!olof
- Newsgroups: comp.sys.sun.hardware
- Subject: Info about S-bus framegrabbers sought
- Message-ID: <1993Jan12.020312.3951@grace.cri.nz>
- From: Olof Olsson <olof@auck.irl.cri.nz>
- Date: Tue, 12 Jan 93 02:03:12 GMT
- Sender: news@grace.cri.nz
- Organization: Industrial research Ltd, Auckland, New Zealand
- X-Xxmessage-Id: <A7788EB457012840@olof.auck.irl.cri.nz>
- X-Xxdate: Tue, 12 Jan 93 15:05:24 GMT
- X-Useragent: Nuntius v1.1.1d16
- Lines: 27
-
- We are wanting to buy some S-bus framegrabbers for our Sun4 workstations.
- I would very much like to get some comments and experiences about good
- (and bad) framegrabbers and their capabilities/prices.
-
- We have the following requirements:
-
- * At least 2, preferably 3, monochrome (8-bit) inputs (we do not require
- color).
-
- * Analog gain and offset must be configurable from software.
-
- * S-bus and Sun IPX compatible.
-
- * Software should be available for interfacing to the board.
-
- * It would be good if 2 framegrabbers can be "synchronised" for
- grabbing the same frame (from different cameras).
-
- Any advice would be greatly appreciated!
-
- Olof
-
- ------------------------------------------------------------------
- Olof Olsson E-mail: olof@auck.irl.cri.nz
- Machine Vision Team Phone: +64 9 303 4116
- Industrial Research Ltd Fax: +64 9 307 0618
- PO Box 2225, Auckland, New Zealand
-