home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.sgi.bugs
- Path: sparky!uunet!cs.utexas.edu!sdd.hp.com!zaphod.mps.ohio-state.edu!darwin.sura.net!blaze.cs.jhu.edu!mozart.med.jhu.edu!scholia.wbme.jhu.edu!tempest!mguttman
- From: mguttman@scholia.wbme.jhu.edu (Mike Guttman)
- Subject: Problem running CaseVision remotely
- Message-ID: <C0I97s.J3B@scholia.wbme.jhu.edu>
- Sender: news@scholia.wbme.jhu.edu
- Nntp-Posting-Host: tempest.wbme.jhu.edu
- Reply-To: mguttman@scholia.wbme.jhu.edu
- Organization: Johns Hopkins University, Dept. of Biomedical Engineering
- Date: Thu, 7 Jan 1993 22:31:03 GMT
- Lines: 9
-
-
- I have a problem running CaseVision remotely on workstations
- if they are not on the same sub-net. I get the error, "Cannot
- attach to process xxxx," after the run key is pressed.
-
- Anybody know how to do this correctly?
-
- - Mike
-
-