home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.sgi
- Path: sparky!uunet!paladin.american.edu!howland.reston.ans.net!usc!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!hamblin.math.byu.edu!hellgate.utah.edu!lanl!dslsn1.lampf.lanl.gov!davew
- From: davew@dslsn1.lampf.lanl.gov (David Whitehouse)
- Subject: rpc problem on SGI 440
- Message-ID: <1993Jan7.190410.15067@newshost.lanl.gov>
- Sender: news@newshost.lanl.gov
- Reply-To: David Whitehouse
- Organization: Los Alamos National Laboratory
- Date: Thu, 7 Jan 1993 19:04:10 GMT
- Lines: 17
-
- Hello,
-
- I have been having a problem with an rpc application running on our
- SGI 440 running irix 4.01. We are using rpc over udp to send a high rate of
- udp packets from a group of MVME 167 (68040) monoboards running VxWorks to the
- SGI. At present we have 6 monoboards connected to 2 different ethernet
- interfaces.
-
- Problem: when running at a high data rate, the SGI networking will periodically
- hang for 10 minutes or so. It is possible to log on from the console but not
- over the network.
-
-
- Any Suggestions?
-
- David Whitehouse
- Los Alamos National Laboratory
-