home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky comp.sys.sgi:18481 comp.sys.sgi.hardware:59
- Path: sparky!uunet!news.univie.ac.at!chx400!urz.unibas.ch!bioftp.unibas.ch!comp.bioz.unibas.ch!doelz
- Newsgroups: comp.sys.sgi,comp.sys.sgi.hardware
- Subject: Re: FAX software for SGI
- Message-ID: <1993Jan5.072309.17577@comp.bioz.unibas.ch>
- From: doelz@comp.bioz.unibas.ch (Reinhard Doelz)
- Date: Tue, 5 Jan 1993 07:23:09 GMT
- Reply-To: doelz@urz.unibas.ch
- Sender: usenet@comp.bioz.unibas.ch (NEWS transaction account)
- References: <clarke.stevens-010193182655@astgator-219.gatech.edu> <ufjceq8@twilight.wpd.sgi.com>
- Organization: EMBnet Switzerland [BASEL]
- Nntp-Posting-Host: biox.embnet.unibas.ch
- Lines: 26
-
- In article <ufjceq8@twilight.wpd.sgi.com>, story@sgi.com (David (Duis) Story) writes:
- |>
- |> Take a look on sgi.sgi.com for the 'flexfax' software. Requires 4.0.X
- |> and Display PostScript.
-
- Thaks for the pointer - I found that it also requires dwb for the man pages.
- I tried to install it and it seemed to do the job. However, the faxd starting
- dies immediately afterwards and tells me that it couldn't find the uid 9999
- - adding this number didn't help either. Any suggestions to this one?
-
- As I currently run a CLASS I fax modem per default, is there anyone out there
- who has modified flexfax or can point to another package which supports
- class I ?
-
-
- Regards
- Reinhard
- --
- +----------------------------------+-------------------------------------+
- | Dr. Reinhard Doelz | RFC doelz@urz.unibas.ch |
- | Biocomputing | DECNET 20579::48130::doelz |
- |Biozentrum der Universitaet | X25 022846211142036::doelz |
- | Klingelbergstrasse 70 | FAX x41 61 261- 6760 or 267- 2078
- | CH 4056 Basel | TEL x41 61 267- 2076 or 2247 |
- +------------- bioftp.unibas.ch is the SWISS EMBnet node ----------------+
- -----------------------------------------
-