home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!spool.mu.edu!uwm.edu!csd4.csd.uwm.edu!anthony
- From: anthony@csd4.csd.uwm.edu (Anthony J Stieber)
- Newsgroups: comp.sys.palmtops
- Subject: Re: external power on 95
- Date: 7 Jan 1993 22:10:51 GMT
- Organization: Computing Services Division, University of Wisconsin - Milwaukee
- Lines: 17
- Distribution: comp
- Message-ID: <1ii9pbINNlgn@uwm.edu>
- References: <1993Jan3.1238.3828@channel1> <61849@aurs01.UUCP>
- NNTP-Posting-Host: 129.89.7.4
-
- In article <61849@aurs01.UUCP> gingell@aurw6b.aur.alcatel.com.UUCP (Mike Gingell) writes:
- >Interesting about the 273-1651B. It is rated at 9V 500 mA while
- >the 273-1455 recommended in the HP95 FAQ is rated at 9V 300 mA.
- >Someone else also posted info from a recent manual which says
- >the voltage limit on the HP95 is 12 volts maximum. This does
-
- I'm one of the editors of the HP95 FAQ list and I posted that article.
- What would be a good power supply to use? It sounds like both of those
- Radio Shack power supplies will put out close to 12 volts on a 95. I
- mentioned that power supply because that's what someone else said
- worked. I'm open to other suggestions.
-
- I can't guarantee any of the information in the FAQ, this is explicitly
- stated in the FAQ. However, I do want the information to be as correct
- as possible.
- --
- <-:(= Anthony Stieber anthony@csd4.csd.uwm.edu uwm!uwmcsd4!anthony
-