home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!paladin.american.edu!howland.reston.ans.net!usc!sdd.hp.com!cs.utexas.edu!sun-barr!ames!saimiri.primate.wisc.edu!crdgw1!newsun!donp
- From: donp@novell.com (don provan)
- Newsgroups: comp.sys.novell
- Subject: Re: SNMP NLM
- Message-ID: <1993Jan12.230841.23704@novell.com>
- Date: 12 Jan 93 23:08:41 GMT
- References: <1993Jan12.165825.18325@lut.ac.uk>
- Sender: news@novell.com (The Netnews Manager)
- Organization: Novell, Inc., San Jose, California
- Lines: 19
- Nntp-Posting-Host: na.sjf.novell.com
-
- In article <1993Jan12.165825.18325@lut.ac.uk> R.Thirlby@lut.ac.uk (Rob Thirlby) writes:
- >I have been unable to set the normally read-write entries in the system
- >group of the MIB on any of our novell servers (3.11). Is this not possible?
- >For example the location and contact entries are normally configurable
- >in any SNMP agent. I have set the community name for control and am
- >using a mature SNMP master station (HP openview).
-
- The NetWare v3.11 SNMP agent predates MIB-II and supports MIB-I only.
- The writable entries in the system group were added in MIB-II. Your
- case confuses me a little because if that's your problem, i would have
- thought you'd notice that you couldn't *read* them, either.
-
- The 2.x version of the NetWare SNMP agent supports MIB-II and allows
- you to read and write the appropriate system group items including
- location and contact. This new version has appeared in a few Novell
- products such as the MultiProtocol Router 2.0 release, but it is not
- available yet in any NetWare release or patch.
- don provan
- donp@novell.com
-