home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!noc.near.net!saturn.caps.maine.edu!maine.maine.edu!rpt359
- Organization: University of Maine System
- Date: Friday, 8 Jan 1993 10:42:48 EST
- From: <RPT359@MAINE.MAINE.EDU>
- Message-ID: <93008.104248RPT359@MAINE.MAINE.EDU>
- Newsgroups: comp.sys.novell
- Subject: disk driver problems with 3.11
- Lines: 11
-
- Has anyone had problems with disk access in 3.11? I have an ST1100 80M
- Seagate running off a WD 1006 controller card in a 386DX clone (AT bus).
- I successfully loaded the ISADISK driver supplied by Novell. INSTALL
- loads correctly, but as soon as I try to access the disk, I get
- "No Accessible Disks Available" message after several seconds of
- system drive access. Apparently Novell can talk to the controller, but
- not the disk. Both Seagate and Western Digital swear total compatibility
- with Novell. I have downloaded and tried a newer version of ISADISK
- dated 7/92, with the same results. DOS 5.0 formats and accesses entire
- disk with no problems. Any suggestions, please mail to
- RPT359@MAINE.MAINE.EDU. Thanks.
-