home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.ibm.pc.hardware
- Path: sparky!uunet!spool.mu.edu!agate!usenet.ins.cwru.edu!neoucom.edu!news.ysu.edu!do-not-reply-to-path
- From: ai076@yfn.ysu.edu (Dan DiPiero)
- Subject: Building a good 486dx2/66 VLB/EISA machine
- Message-ID: <1993Jan12.034632.8613@news.ysu.edu>
- Sender: news@news.ysu.edu (Usenet News Admin)
- Nntp-Posting-Host: yfn.ysu.edu
- Organization: Youngstown State University/Youngstown Free-Net
- Date: Tue, 12 Jan 1993 03:46:32 GMT
- Lines: 10
-
-
- I am looking to build a good 486/66dx2, and I would like to get information
- on where to buy VLB/EISA motherboards. Ihave heard of AIR, and Micronics,
- but I am not familiar with either of them, and maybe somebody out there
- has some experience with these or other suppliers. I would like to buy
- straight from the producer if possible (is this a good idea?) I need phone numbers
- and/or addresses to get in contact with them, and any suggestions to prevent
- the $5000 mistake (should be cheaper than $5000).
- thanks
- Dan-O
-