home *** CD-ROM | disk | FTP | other *** search
/ NetNews Usenet Archive 1993 #1 / NN_1993_1.iso / spool / comp / sys / hp48 / 6691 < prev    next >
Encoding:
Internet Message Format  |  1993-01-05  |  714 b 
  1. From: akcs.levenson@hpcvbbs.cv.hp.com (william j. levenson)
  2. Date: Tue, 5 Jan 1993 19:40:02 GMT
  3. Subject: Re: SYSEVAL #CEEAh (disable clock)
  4. Message-ID: <2b49df90.2560.1comp.sys.hp48.1@hpcvbbs.cv.hp.com>
  5. Path: sparky!uunet!zaphod.mps.ohio-state.edu!sdd.hp.com!hp-cv!hp-pcd!hpcvra!rnews!hpcvbbs!akcs.levenson
  6. Newsgroups: comp.sys.hp48
  7. References: <2b48f1ee.2560comp.sys.hp48@hpcvbbs.cv.hp.com>
  8. Lines: 8
  9.  
  10. To disable the clock display in a program, why not use the HP supported
  11. ClrDA1IsStat at #39531h ?  I haven't disassembled this and it may use the
  12. #CEEAh address but I'm not sure what that is doing either.  When in
  13. doubt, I would use the HP supported entry points when possible.
  14.  
  15. I hope this helps,
  16.  
  17. Bill Levenson
  18.