home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!dtix!darwin.sura.net!haven.umd.edu!decuac!pa.dec.com!cworld.shr.dec.com!smith
- From: smith@cworld.shr.dec.com (Shrewsbury ECAD group.)
- Newsgroups: comp.sys.dec
- Subject: Re: Making DEC RZ56 spin up on power up
- Message-ID: <1is2t8INNrgi@usenet.pa.dec.com>
- Date: 11 Jan 93 15:14:48 GMT
- References: <8479@news.duke.edu>
- Reply-To: joe@shr.dec.com
- Organization: Digital Equipment Corporation
- Lines: 17
- NNTP-Posting-Host: cworld.shr.dec.com
-
- I can't recall if the RZ56 has a spin-up jumper or not. If it does not, then
- you can use the rzdisk facility in Ultrix to set the appropriate bit in the
- drive's firmware.
-
- Joe
-
-
-
- --------------------------------------
- Joe Smith
-
- Internet: joe@shr.dec.com UUCP: !decwrl!shr.dec.com!joe
-
- Digital Equipment Corporation
- Northeast Technology Center,
- 333 South St.
- Shrewsbury, Ma. 01545-4112
-