home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!dtix!darwin.sura.net!haven.umd.edu!decuac!pa.dec.com!engage.pko.dec.com!nntpd.lkg.dec.com!samuel.enet.dec.com!marra
- From: marra@samuel.enet.dec.com (Dave Marra)
- Newsgroups: comp.sys.dec
- Subject: Re: How do you install disk in VS4000/90?
- Message-ID: <1993Jan11.153329.27164@nntpd.lkg.dec.com>
- Date: 11 Jan 93 15:33:29 GMT
- References: <1ikjedINNrns@shelley.u.washington.edu>
- Sender: usenet@nntpd.lkg.dec.com (USENET News System)
- Reply-To: marra@samuel.enet.dec.com (Dave Marra)
- Organization: Digital Equipment Corporation, Hudson, NH
- Lines: 26
-
-
-
- RE: Installing a Fujitsu M2624FA into a VAXstation 4000-90.
-
- Call DEC Direct, and ask them for the part number for the mounting
- bracket for the drive. However, since you already have the H-Bracket,
- I'll assume that you have a disk inside already? If so, take out that
- disk and look at the part number stamped on the mounting bracket.
- if not, then call DEC Direct, and tell them that you've upgraded from
- one machine to another and that you need the mounting bracket part
- number. The bracket is simply a stamped piece of metal...
-
- If you opt to just connect the cables, and sit it inside, at least use some
- duct tape to secure it to the H-Bracket. I've done this before.
-
- .dave.
-
- --
- +-----------------------------------------------------------------------------+
- + Dave Marra X TMF Engineering +
- + Software Validation Suites X 35 Carriage Lane +
- + X Window System / Motif / VMS X Milford, NH 03055 +
- +-----------------------------------------------------------------------------+
- + Currently working at Digital Equipment Corporation, Littleton, MA +
- + marra@samuel.dec.com +
- +-----------------------------------------------------------------------------+
-