home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!charon.amdahl.com!netcomsv!netcomsv!wet!ekrimen
- From: ekrimen@wet.UUCP (Ed Krimen)
- Newsgroups: comp.sys.atari.st.tech
- Subject: Re: Falcon Monitors (?)
- Message-ID: <4956@wet.UUCP>
- Date: 11 Jan 93 19:15:55 GMT
- References: <C0oLvD.Bsp@cck.coventry.ac.uk>
- Organization: Wetware Diversions, San Francisco
- Lines: 21
-
- In article <C0oLvD.Bsp@cck.coventry.ac.uk> jat@cch.coventry.ac.uk (STBW) writes:
- >
- > What I need to know is what sort of monitor will I need to buy, so that
- >I can display all the Falcon modes upto the 768x480 'True colour'
- >(Over-scanned) without interlace, and still be able to use it on my STe in
- >Low, Med and High reses ?
-
- Using the monitor on your STE in all three resolutions will limit your choices.
- I'd recommend an NEC 3D, Princeton 1400 Ultra, or Sony 1302. All three are
- available from different places and they'll all work on the Falcon and STE
- (with a switchbox on the STE). They should be available for around $400.
-
- To be honest though, I don't quite understand all the graphics modes of the
- Falcon, and I'm not sure if these monitors will work in that 768x480
- non-interlaced true-color mode that you want. The monitors will work with
- the Falcon, but I'm not sure in that particular mode.
-
- --
- ||| Ed Krimen
- ||| ekrimen@wet.uucp
- / | \ E.KRIMEN (GEnie)
-