home *** CD-ROM | disk | FTP | other *** search
- From: clausb@hpbbrd.bbn.hp.com (Claus Brod)
- Date: Mon, 11 Jan 1993 10:56:06 GMT
- Subject: Re: Conner HD on a TT
- Message-ID: <C0orpJ.MJL@hpbbrd.bbn.hp.com>
- Organization: HP Mechanical Design Division
- Path: sparky!uunet!cs.utexas.edu!uwm.edu!zaphod.mps.ohio-state.edu!howland.reston.ans.net!usc!sdd.hp.com!hpscit.sc.hp.com!hplextra!hpcc05!hpbbn!hpbbrd!clausb
- Newsgroups: comp.sys.atari.st
- References: <2b4c028d@p12.f202.n281.z2.fidonet>
- X-Newsreader: TIN [version 1.1.8 PL6]
- Lines: 22
-
- Jan_Willekens@p12.f202.n281.z2.fidonet wrote:
- > Yesterday, I connected a Conner RZ23L hard disk (120Mb) as the internal
- > hard disk to a TT (TOS 3.05, probably rev. C), but that combination doesn't
- > work as it should.
- >
- > I have heard that various problems are known when using Conner HD on TT's,
- > so can anyone help me out? Or does anyone have some documentation on this
- > Conner HD concerning the meaning of the various jumper settings??
-
- I'm not quite sure but this sounds as if the ICD driver software does
- not implement the TT SCSI protocol correctly. (There's only one
- driver that does: CBHD for the TT. This driver will be publicly
- available RSN, so you may want to test it for your drive. If you
- just can't wait, please contact me via me e-mail.) Probably the
- Conner driver sends some SCSI messages to the host after start-up,
- and the code that I've seen in both AHDI and other third-party
- drivers does not understand that.
-
- --
- --clausb@hpbeo79.bbn.hp.com----------------------------------------------
- Claus Brod, MDD, HP Boeblingen Things. Take. Time. (Piet Hein)
- --#include <std_disclaimer>----------------------------------------------
-