home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.apple2
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!darwin.sura.net!haven.umd.edu!purdue!mentor.cc.purdue.edu!noose.ecn.purdue.edu!roby.ecn.purdue.edu!platkus
- From: platkus@roby.ecn.purdue.edu (Shawn W Platkus)
- Subject: System Saver GS on the blink
- Message-ID: <platkus.726864349@roby.ecn.purdue.edu>
- Sender: news@noose.ecn.purdue.edu (USENET news)
- Organization: Purdue University Engineering Computer Network
- Date: 12 Jan 93 18:45:49 GMT
- Lines: 24
-
-
- I've seen posts on here before about problem with the Kensington System Savers,
- so maybe someone can help. The other day, the master switch no longer provided
- power when I pushed it on. It didn't light up and the fan didn't spin, but
- it was plugged in and the Aux switch worked. So, I took it apart to see if
- I could spot any loose wires, but everything looked ok, and when I plugged it
- in with it apart, it worked again. Then, of course, after I get it put back
- together, it worked for the rest of that day, but then the next day it was not
- working again.
-
- My guess is that it is the switch itself that is bad.
- Has anyone else experienced this problem?
-
- Any advice would be appreciated.
-
- Thanks
-
- Shawn
-
- --
- _______ __ _____ ________ __ _ __ __ ______
- \\// _ // || // || | || | || // || || // @ecn.purdue.edu
- //____// ||_ //===||_ ||_ ||<< ||_ ||_ /=====/
- _//_ _||/__/ _// _||/ _||/_ _|| \\_ _||/___||/ _____//
-