home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.apple2
- Path: sparky!uunet!nevada.edu!jimi!news.cs.unlv.edu.!sknkwrks
- From: sknkwrks@sonny-boy.cs.unlv.edu (Scott Alfter)
- Subject: Re: On the topic of SSC baud rate generators...
- In-Reply-To: badbunny@tfsp.saic.com's message of 3 Jan 1993 18:27:02 -0600
- Message-ID: <SKNKWRKS.93Jan6000433@sonny-boy.cs.unlv.edu>
- Sender: news@unlv.edu (News User)
- Organization: Skunk Works Software Co.
- References: <9301040027.AA19389@deepthought.cs.utexas.edu>
- Date: 06 Jan 93 07:04:33 GMT
- Lines: 15
-
- In article <9301040027.AA19389@deepthought.cs.utexas.edu> badbunny@tfsp.saic.com (Brendan Hoar) writes:
- > The 8116 baud rate generator hip work fine, I use them alot.
- > Its a 18 pin device. Hang a 4.915200MHz or a 5.068800MHz crystal
- > of it with a dip switch and its done, easy. The out put is 16x
- > the desired baud rate. The parts can be ordered through Jameco
- > in Belmont CA. 1-800-831-4242.
- > Any questions just ask.
-
- Keep in mind, though, that Jameco has a fairly stiff minimum-order
- requirement. I'd try finding the parts someplace else first.
-
- _/_ Scott Alfter Internet: sknkwrks@cs.unlv.edu
- / v \ Call the Skunk Works BBS today! Ask me about SoftDAC--digital
- (IIGS( (702) 894-9619 300-14400 V.32bis audio for your Apple IIe/IIc!
- \_^_/ --==## "Apple II Forever" is a trademark of Apple Computer, Inc. ##==--
-