home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!paladin.american.edu!howland.reston.ans.net!wupost!usc!news.service.uci.edu!ucivax!bonnie.ics.uci.edu!jimmys
- From: jimmys@bonnie.ics.uci.edu (Jimmy Shaw)
- Subject: Re: Apple ][ Serial Card Technical Info
- Nntp-Posting-Host: bonnie.ics.uci.edu
- Message-ID: <2B484E85.29261@ics.uci.edu>
- Newsgroups: comp.sys.apple2
- Reply-To: jimmys@ics.uci.edu (Jimmy Shaw)
- Organization: Univ. of Calif., Irvine, Info. & Computer Sci. Dept.
- Lines: 47
- Date: 4 Jan 93 14:49:41 GMT
- References: <1993Jan4.060444.6516@nuscc.nus.sg>
-
- In article <1993Jan4.060444.6516@nuscc.nus.sg> scip2060@nusunix1.nus.sg (SARDJONO INSANI) writes:
- >
- >Hi,
- >Does anybody know the technical information about apple serial card
- >including the pinouts?
- >Thanks
- >
-
- Hey I just happen to have my Apple II SSC Installation and Operating
- Manual with me.
-
- On page 98, under the section called Connector Pin Assignment:
-
- 10-pin DB-25
- header Connector Signal name
- ------ --------- ------------
- 1 1 Frame Ground
- 2 2 Transmit Data (TXD)
- 3 3 Receive Data (RXD)
- 4 4 Request to Send (RTS)
- 5 5 Clear to Send (CTS)
- 6 6 Data Set Ready (DSR)
- 7 19 Secondary Clear to Send (SCTS)
- 8 7 Signal Ground
- 9 20 Data Terminal Ready (DTR)
- 10 8 Data Carrier Detect (DCD)
-
- Okay, hope this helps!
-
- >
- >
- >*****************************************************************
- >* NAME : Sardjono Insani *
- >* INTERNET : scip2060@nusunix1.nus.sg *
- >* HOME : Block 285, Bishan St 22, #06-219, Singapore 2057 *
- >* OFFICE : 512 Thomson Rd, MCD Bldg, #16-00, Singapore 1129 *
- >* PHONE : 350-6085 (office) 454-5042 (home) *
- >*****************************************************************
-
- Jimmy
-
-
-
- --
- Jimmy Shaw RamFAST, ZipGSX and 6.0... Apple II Forever!
- jimmys@ics.uci.edu
- -----------------------------------------------------------------------------
-