home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.amiga.hardware
- Path: sparky!uunet!gatech!darwin.sura.net!spool.mu.edu!yale.edu!ira.uka.de!math.fu-berlin.de!news.netmbx.de!Germany.EU.net!mcsun!sunic!seunet!pop!bjst
- From: bjst@sth.frontec.se (Bjorn Stenberg)
- Subject: Re: Monitors, monitors and 5D!!
- Message-ID: <1993Jan8.092512.2351@sth.frontec.se>
- Nntp-Posting-Host: pop.sth.frontec.se
- Organization: IDK/Frontec - System Design Group
- References: <1993Jan8.033719.7961@usage.csd.unsw.OZ.AU>
- Date: 8 Jan 93 09:25:12 GMT
- Lines: 34
-
- (I post this, since many people have questions about the NECs.)
-
- amiga@spectrum.cs.unsw.oz.au (Amiga Utilities) writes:
- > What I want to know is if the 5D will sync down to 15kHz
-
- No it won't. The 5D's horizontal scan rate range is 31.5-66 kHz.
- The only NEC that does 15 kHz is the DataSmart DM-2710 (15-38 kHz).
-
- > and what will I need to do to be able to use it? (Cabling, etc.)
-
- It uses a standard 15-pin connector, so you'll likely be able to hook it
- right up to your flicker fixer (or whatever you use).
-
- > 1) Will it be safe to sit this huge beast on top of my A2500?
-
- Umm, I haven't studied the physics of the A2000 box :-) but considering the
- 5D is a rather large dude (H:19",D:19",W:21") I think you'd try it before
- you buy.
-
- > 2) How much should I expect to pay for an ex-demo Multisync 5D?
- > (Either in A$ or US$)
-
- Can't say. My product sheet state a list price of $2.699 (US) so anything
- below that... :-)
-
- > Thanks heaps for any info.
-
- Hope this helps.
-
- -- Bjorn
-
- ---------------------------------------------------------------------------
- Bjorn Stenberg, Stockholm, Sweden bjst@sth.frontec.se
- ---------------------------------------------------------------------------
-