home *** CD-ROM | disk | FTP | other *** search
/ NetNews Usenet Archive 1993 #1 / NN_1993_1.iso / spool / comp / sys / amiga / hardware / 22472 < prev    next >
Encoding:
Text File  |  1993-01-06  |  1.2 KB  |  26 lines

  1. Newsgroups: comp.sys.amiga.hardware
  2. Path: sparky!uunet!gatech!usenet.ins.cwru.edu!agate!rsoft!mindlink!a185
  3. From: Gord_Pope@mindlink.bc.ca (Gord Pope)
  4. Subject: Re: AdSpeed and DKB quikstart
  5. Organization: MIND LINK! - British Columbia, Canada
  6. Date: Wed, 6 Jan 1993 14:56:55 GMT
  7. Message-ID: <19285@mindlink.bc.ca>
  8. Sender: news@deep.rsoft.bc.ca (Usenet)
  9. Lines: 15
  10.  
  11. Ive put the ADSPEED in my 1000 with the KWIKSTART II.  The KS II is still in
  12. the 1000 but I've moved the ADSPEED to my 2000.
  13. Did it work?  Initially, it came up flawlessly under both 2.0 and 1.3.
  14. However, I found that the combination of these two products plus 2.0 on a
  15. 1000 with the software I was running was too unstable.  I can't remember all
  16. the problems I had or what I did about them (other than buying a friend's
  17. 2000).  I do have some hack type memory and a similar type hard drive on the
  18. 1000.  Perhaps that contributed to the unstableness.  Yes I grounded all the
  19. appropriate PALS.  (I think).  Since my 1.3 system used to be so stable,
  20. that's what I run on the 1000 now with the KS II board still in.  The ADSPEED
  21. runs 2.0 on the 2000.  Acording to both manufacturers, the products should be
  22. compatible.  The ADSPEED does work very well in the 2000.
  23.  
  24. Good luck!
  25. Gord.
  26.