home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!pipex!bnr.co.uk!uknet!keele!news
- From: u2d92@seq1.keele.ac.uk (MJ Gumbley)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Making A2090 HD Interface autobooT
- Message-ID: <C0By3u.E1w@gabriel.keele.ac.uk>
- Date: 4 Jan 93 12:45:28 GMT
- Sender: news@gabriel.keele.ac.uk (UseNet News Service)
- Organization: Keele University, England
- Lines: 18
- Nntp-Posting-Host: seq1.cc.keele.ac.uk
-
- Hello all,
-
- I've got an old A2000, Revision 4, with a A2090 hard disk controller.
- There are two hard disks on it, and at the moment, I have to boot from
- floppy, because the A2090 does not support autoboot. As soon as the boot
- starts, I run BindDrivers, and mount the hard drives, and continue from
- there.
-
- Is there anything I can do to make the card into an autoboot controller?
- Is there a later version of the ROM? If so, where do I get one from?
- (Commodore presumably.)
-
- Thanks folks.
-
- --
- Matt J. Gumbley || Still needs a good signature, not liking
- u2d92@seq1.cc.keele.ac.uk || any of his recent feeble improvements on:
- University of Keele, England || Why can't _I_ think of a good signature?
-