home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!crdgw1!rdsunx.crd.ge.com!smsun45!davisje
- From: davisje@smsun45.crd.ge.com (jonathan e davis)
- Newsgroups: comp.sys.amiga.applications
- Subject: Re: help with 2.0
- Message-ID: <1993Jan12.215610.4628@crd.ge.com>
- Date: 12 Jan 93 21:56:10 GMT
- References: <24903@galaxy.ucr.edu>
- Sender: usenet@crd.ge.com (Required for NNTP)
- Organization: GE Corp. Research & Development, Schenectady, NY
- Lines: 23
- Nntp-Posting-Host: smsun45.crd.ge.com
-
- In article <24903@galaxy.ucr.edu> wilsonm@watmon.ucr.edu (Mark Wilson) writes:
- >
- >I have a slight problem. I have a A-2000 running Workbench 1.3. I have an O30
- >board with 16 MB of ram and a Video Toaster board installed. I just purchased
- >Cinemorph and it requires 2.0 or higher to run. I have heard that the Toaster
- >does not like 2.0. What is the process to upgrade the machine to 2.0 if this
- >is the case. I cannot loose the Toaster. In the worst case situation, I will
- >dedicate another Amiga for Cinemorph. Any help is appreciated.
-
- You'll need the 2.04 ROM, but in addition to maintain compatibility with
- 1.3 you'll need to keep that ROM as well. There are a couple of
- products on the market that allow the installation of both ROM chips.
-
- One product, MultiStart II, has slots for three ROM chips, I believe,
- with a keyboard sequence to indicate which is used. It currently sells
- for about $40. The 2.1 upgrade runs $85 mailorder.
-
-
-
-
- Jon Davis E-mail: davisje@crd.ge.com
- GE Corporate Research & Development Center Phone: (518) 387-5487
- Schenectady, NY
-