home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.acorn
- Path: sparky!uunet!usc!sol.ctr.columbia.edu!The-Star.honeywell.com!umn.edu!student.tc.umn.edu!alla0008
- From: alla0008@student.tc.umn.edu (Graham Allan)
- Subject: Re: Hearsay II and RISC OS 3
- Message-ID: <1993Jan6.164048.20732@news2.cis.umn.edu>
- Sender: news@news2.cis.umn.edu (Usenet News Administration)
- Nntp-Posting-Host: student.tc.umn.edu
- Organization: University of Minnesota
- References: <C0Buvv.8r3@newcastle.ac.uk> <3f-8o8j027n@khantazi.welly.gen.nz> <1993Jan6.121228.17115@cs.tu-berlin.de>
- Date: Wed, 6 Jan 1993 16:40:48 GMT
- Lines: 18
-
- In article <1993Jan6.121228.17115@cs.tu-berlin.de> alien@opal.cs.tu-berlin.de (Marc Fischer) writes:
- >
- >Some days ago I received a package, that included something relating the
- >serial port (setting the buffersize). In the documentation the author told
- >about the discussed problem. He mentioned, that the SERIALUTIL-Module suited
- >with RISC OS 3 mustn`t be used with HearsayII since this has it`s own Module
- >that fixes the problems.
-
- Later versions of Hearsay (maybe 2.12 and later) have special modules to
- deal with RO3 and RO3.1. I use the current version of Hearsay 2 with RO3.1
- on an old 300-series with no trouble. Earlier versions of Hearsay may need
- the SerialUtil module, but it would be easier to update your software.
-
- It does seem to be more prone to CRC errors etc under RO3, if you open a
- filer window or something during an file transfer. Interrupt problems at
- 2400 baud?
-
- Graham.
-