home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.protocols.tcp-ip.ibmpc
- Path: sparky!uunet!spool.mu.edu!sgiblab!newsun!keith2!keith
- From: keith@keith2 (Keith Brown)
- Subject: Re: TCP/IP on a Novell NE2100?
- Message-ID: <keith.7.0@keith2>
- Lines: 29
- Sender: news@novell.com (The Netnews Manager)
- Nntp-Posting-Host: keith2.sjf.novell.com
- Organization: Connectivity Products Division, Novell Inc.
- References: <1ior7vINN2p4@gap.caltech.edu>
- Date: Sun, 10 Jan 1993 17:10:34
-
- In article <1ior7vINN2p4@gap.caltech.edu> czim@hub.caltech.edu (Chris Ziomkowski) writes:
- >I recently purchased a Novell NE2100 ethernet card which I wish to run
- >TCP/IP over to connect to my Sun and my Macintosh. I have no desire to run
- >Novell's Netware at this time.
-
- You can't be serious! :-)
-
- >I need to know where I can get software drivers to allow this.
-
- Sure. The NE2100 ODI driver is part of the "vanilla" Novell ODI distribution,
- the latest incarnation of which is on sjf-lwp.novell.com (130.57.11.140) in
- the file "ODI/DOSUP6.ZIP" (or you can get it from the main Novell server
- ftp.novell.com if you prefer. I think forum 05 is the place).
-
- Once you have the ODI driver cooking you can then proceed to run just about
- any TCP/IP you wish. Our own LAN WorkPlace TCP/IP stack is written natively to
- the ODI and a description of the latest release of the LWP product is also on
- sjf-lwp in the "lwp4dos/lwp41.txt" file. If you would rather run a packet
- driver based TCP/IP then you'll need ODIPKT, also on sjf-lwp (somewhere!).
- Finally, if an NDIS based TCP/IP is "your bag" then you'll need ODINSUP which
- is an NDIS driver for ODI drivers. This lives in DOSUP6.ZIP along with the
- rest of the Novell ODI distribution. ODINSUP is now compatible with the NDIS
- version 2.0 specification.
-
- Keith
- -
- Keith Brown Phone: 408-473-8308
- Novell San Jose Development Center Fax: 408-473-8990
- 2180 Fortune Drive, San Jose, CA 95131 Net: keith@sjf.novell.COM
-