home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!gatech!darwin.sura.net!zaphod.mps.ohio-state.edu!cis.ohio-state.edu!udecc.engr.udayton.edu!blackbird.afit.af.mil!dsacg3.dsac.dla.mil!dcsc.dla.mil!cp01395
- From: cp01395@dcsc.dla.mil (Duane L. Rezac)
- Newsgroups: comp.protocols.nfs
- Subject: Re: PC-NFS & 3C503/telnet
- Message-ID: <1669@dcsc.dla.mil>
- Date: 6 Jan 93 14:08:12 GMT
- References: <Jan05.170044.33736@yuma.ACNS.ColoState.EDU>
- Organization: Defense Construction Supply Center, Columbus
- Lines: 30
-
- From article <Jan05.170044.33736@yuma.ACNS.ColoState.EDU>, by pruett@CS.ColoState.EDU (J. L. Pruett):
- > I have been updating a 286 pc with a 3c501 ethernet card to a
- > 386pc with a 3c303 card. Apparently, I've ran into mutual exclusivity.
- >
- > If I load the Clarkson packet driver for the 503 card, the NFS
- > stops working correctly. If I don't load it, the NFS works fine,
- > but the telnet process won't work (obviously, no packet driver installed).
- >
- > Any suggestions? The driver looks like 3c503 0x60 5 0x300.
- >
- > Thanks,
- > Jenny
-
- Get PKTMUX from simtel or your favorite site - and get the
- pktdrv.sys for your pcnfs.
-
- I'm running pktmux with a packet driver for a wd8013 card - they
- both work fine.
-
-
-
-
-
-
- Duane L. Rezac
- --
- +-----------------------+---------------------------------------------------+
- | Duane L. Rezac |These views are my own, and NOT representitive of my place|
- | drezac@dcsc.dla.mil of Employment. |
- +-----------------------+---------------------------------------------------+
-