home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky comp.os.vxworks:1195 comp.sys.sgi:18712
- Path: sparky!uunet!cis.ohio-state.edu!zaphod.mps.ohio-state.edu!moe.ksu.ksu.edu!kuhub.cc.ukans.edu!nrlvx1.nrl.navy.mil!dyer
- Newsgroups: comp.os.vxworks,comp.sys.sgi
- Subject: sgi CC v3.1 & VxGDB incompatible
- Message-ID: <1993Jan12.101638.901@nrlvx1.nrl.navy.mil>
- From: dyer@nrlvx1.nrl.navy.mil (Doug Dyer)
- Date: 12 Jan 93 10:16:38 -0400
- Organization: NRL SPACE SYSTEMS DIVISION
- Lines: 22
-
- Hi folks,
-
- I am using an SGI indigo r3000 as a vxworks host
- (Iris 4D1-4.1) with cc (v3.10) and VxGDB to debug software (v1.1).
- The following problems occur when I load a file into the debugger:
-
- if the source code has a "struct" in it :
- unknown symbol type 1a
- if the source code has a "union" in it:
- unknown symbol type 1b
-
- The vxworks tech support mentions that these messages come from the GNU
- gdb kernel which they use, and mentioned that these problems do not occur
- with atleast version 2.0 of the cc compiler.
-
- has anyone had this problem and solved it? is all I need an older version
- of the C compiler?
- --
- Doug Dyer * STI * dyer@nrlvax.nrl.navy.mil | "(2B) | !(2B) -> ?"
- DISCLAIMER: These are my opinions, and not necessarily | LOWLY SHOPKEEPER,
- those of STI, NRL, and most likely you too. | WHERE IS YOUR PEZZ!
- --------------------------------------------------------+---------------------
-