home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.os.ms-windows.misc
- Path: sparky!uunet!haven.umd.edu!decuac!pa.dec.com!rdg.dec.com!uvo.dec.com!e2big.mko.dec.com!trooa.enet.dec.com!curzon
- From: curzon@trooa.enet.dec.com (Richard Curzon)
- Subject: How about: Star NX-10 driver?
- Message-ID: <1993Jan7.134633.9175@e2big.mko.dec.com>
- Sender: usenet@e2big.mko.dec.com (Mr. USENET)
- Organization: Digital Equipment Corporation
- Date: Thu, 7 Jan 1993 13:47:06 GMT
- Lines: 24
-
-
- In article <24605@hacgate.SCG.HAC.COM>, bill@solaria (Bill Neisius) writes...
- >Iskandar Taib (ntaib@silver.ucs.indiana.edu) wrote:
- >: In article <24590@hacgate.SCG.HAC.COM> bill@solaria.hac.com writes:
- >: >Erik Petersen (peterse@prism.CS.ORST.EDU) wrote:
- >: >The SG10 driver is the original Star 10X driver from Windows 1.0.
- >... etc...
-
- I have to throw myself on the graces of the net too... I had no idea
- the Star NX-10 was going to be so short lived....
- ==========
- Now it's about the ONLY printer I haven't seen a WIN3 driver for.
- The NX-1000 driver works better than the SG-10 driver, but there's a part
- of some unrecognized initialization that results in a "1" being printed
- in the corner of every page...
-
- I played with every 9 pin driver from most major manufacturers to find one
- that's closer: no luck. So fellow Nx-10 owners: there must be SOMEONE
- who's patched the driver? Thanks for any pointers..
-
- Richard Curzon, Digital Equipment of Canada
- Toronto
- (from INTERNET) curzon@trooa.ENET.dec.com
- (from COMPUSERVE) 71371,2521 OR >INTERNET:curzon@trooa.ENET.dec.com
-