home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky comp.os.linux:23378 comp.windows.x.i386unix:238
- Newsgroups: comp.os.linux,comp.windows.x.i386unix
- Path: sparky!uunet!think.com!yale.edu!ira.uka.de!news.belwue.de!sun1.ruf.uni-freiburg.de!hartnegg
- From: hartnegg@sun1.ruf.uni-freiburg.de (Klaus Hartnegg)
- Subject: Re: Help with Xconfig = (800x600 != full screen) && (1024x768 == mess)
- Message-ID: <1993Jan9.183118.4572@sun1.ruf.uni-freiburg.de>
- Organization: Rechenzentrum der Universitaet Freiburg, Deutschland
- References: <1993Jan8.233152.27220@murdoch.acc.Virginia.EDU>
- Date: Sat, 9 Jan 93 18:31:18 GMT
- Lines: 26
-
- dwb4h@poe.acc.Virginia.EDU (Daniel W. Bingler) writes:
-
- > I'm using an ET4000 1mb w/ Interlaced monitor. 640x480 works fine,
- >but that is it. I can't get 1024x768 to come close. I get multiple
- >screens. My monitor has screen frequences of horiz. 31.5/35.5KHz and
- >vert 50-87Hz. These rating don't even seem to give the right resolution.
- >These resolution work fine under Dos.
-
- My monitor also has 31.5 and 35.5 KHz. It has 40MHz max band width.
- However there is no way to get 1024x768 with 40 MHz.
- The bios of my tseng uses 44.9 MHz. This works well on my monitor.
- Try it but please don't blame me if your monitor gets damaged.
-
- Try to to get a new version of dmode.
- The new versions display the parameters used by the bios.
- I think it's in the list one gets with the F2 key.
-
- Good luck!
-
- Klaus
- --
- ------------------------------------------------------------------------------
- Klaus Hartnegg, Kleist-Str. 7, D-7835 Teningen, Germany
- hartnegg@sun1.ruf.uni-freiburg.de or hakl@ibm.ruf.uni-freiburg.de
- Disclaimer: this text reflects MY opinion, not that of my employer!
-