home *** CD-ROM | disk | FTP | other *** search
/ NetNews Usenet Archive 1993 #1 / NN_1993_1.iso / spool / comp / multimed / 3978 < prev    next >
Encoding:
Text File  |  1993-01-04  |  2.1 KB  |  50 lines

  1. Newsgroups: comp.multimedia
  2. Path: sparky!uunet!spool.mu.edu!sdd.hp.com!col.hp.com!news.dtc.hp.com!srgenprp!hpsrdmo.sr.hp.com!darrylo
  3. From: darrylo@hpsrdmo.sr.hp.com (Darryl Okahata)
  4. Subject: Re: Help with PAS-16, NEC-84, and Adaptec 1522
  5. Sender: news@srgenprp.sr.hp.com (placeholder for future)
  6. Message-ID: <C0Cvyw.JGG@srgenprp.sr.hp.com>
  7. Date: Tue, 5 Jan 1993 00:56:55 GMT
  8. Reply-To: darrylo@sr.hp.com
  9. References: <29830@ursa.bear.com>
  10. Organization: Hewlett-Packard / Center for Primal Scream Therapy
  11. X-Newsreader: TIN [version 1.1 PL8]
  12. Lines: 36
  13.  
  14. [ One more time .... ]
  15.  
  16. Arnold Chu (chu@pit.bear.com) wrote:
  17.  
  18. > SCSI devices are designed to be daisy chained on a SINGLE SCSI controller
  19. > within your PC.  Since the PAS-16 seem to have the SCSI controller built in,
  20. > you have to remove the Adaptec controller card and daisy chain the Quantum
  21. > drive to the PAS-16 controller card.
  22.  
  23.      No, no, no.
  24.  
  25.      If at all possible, DO NOT CONNECT the Quantum drive to the PAS 16
  26. card.  The PAS 16 SCSI interface is a LOW SPEED interface designed for
  27. CDROMs, etc.; while the throughput of the PAS 16 SCSI interface is most
  28. than enough for CDROMs, etc., it is nowhere near the throughput of SCSI
  29. controllers designed primarily for use with hard disks.  Also, in order
  30. to connect a SCSI hard disk to the PAS 16 interface, you supposedly need
  31. additional drivers from Trantor (read: additional $$$).
  32.  
  33.      Connecting a SCSI hard disk to the PAS 16 SCSI interface, when you
  34. already have an Adaptec card, will only SLOW DOWN your system.  If this
  35. is your goal, by all means go ahead.
  36.  
  37.      I'm not sure what the problem is with the Adaptec 1522.  I'm using
  38. the PAS 16 w/CDROM and an Adaptec 1542A w/HD, and everything works fine.
  39. Maybe you need a newer version of the CDROM driver (TSLCDR.SYS?).
  40.  
  41.      One of these days, I'm going to move the CDROM from the PAS16 to
  42. the 1542A.
  43.  
  44.      -- Darryl Okahata
  45.     Internet: darrylo@sr.hp.com
  46.  
  47. DISCLAIMER: this message is the author's personal opinion and does not
  48. constitute the support, opinion or policy of Hewlett-Packard or of the
  49. little green men that have been following him all day.
  50.