home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!cs.utexas.edu!sdd.hp.com!network.ucsd.edu!ivem.ucsd.edu!spl
- From: spl@ivem.ucsd.edu (Steve Lamont)
- Newsgroups: comp.graphics
- Subject: Re: PC ray-tracing
- Date: 11 Jan 1993 14:44:10 GMT
- Organization: University of Calif., San Diego/Microscopy and Imaging Resource
- Lines: 16
- Distribution: world
- Message-ID: <1is13qINNmu9@network.ucsd.edu>
- References: <871.132.uupcb@tfd.coplex.com>
- NNTP-Posting-Host: ivem.ucsd.edu
-
- In article <871.132.uupcb@tfd.coplex.com> eric.vitiello@tfd.coplex.com (Eric Vitiello) writes:
- > Sorry... It's going to be very hard to find a ray tracer for an IBM
- > compatible comuter for under $500.... If you do find one, it may not
- > do all that you want. ...
-
- How about a ray tracer for free? Check Rayshade or any of the other
- RTs regularly discussed on this newsfroup.
-
- Now a modeler... that's a different story.
-
- spl
- --
- Steve Lamont, SciViGuy -- (619) 534-7968 -- spl@szechuan.ucsd.edu
- UCSD Microscopy and Imaging Resource/UCSD Med School/La Jolla, CA 92093-0608
- "Personally, I don't care whether someone is cool enough to quote Doug
- Gwyn--I only care whether Doug Gwyn is cool enough to quote." - Larry Wall
-