home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!munnari.oz.au!ariel.ucs.unimelb.EDU.AU!werple.apana.org.au!brimbank!nick
- From: nick@brimbank.apana.org.au (Nick Langmaid)
- Newsgroups: comp.bbs.waffle
- Subject: Re: uucico problems
- Message-ID: <pYhUrAKABh107h@brimbank.apana.org.au>
- Date: Mon, 11 Jan 93 19:51:53 +1100
- References: <1993Jan9.183411.1644@actrix.gen.nz>
- Organization: APANA, Melbourne.
- Lines: 27
-
- In <1993Jan9.183411.1644@actrix.gen.nz> patrick@actrix.gen.nz (Pat Cain) writes:
-
- >For the last week or so I've noticed that my copy of UUCICO is just
- >freezing at the end of a connection (whether incoming or outgoing).
- >I haven't made any configuration changes in the last week.
-
- >When it hangs the other end seems to keep sending packets every few
- >seconds then eventually hangs up. Uucico at this end doesn't register
- >the other end hanging up and continues to sit there. The only way
- >to reset the machine is the three-fingered salute.
-
- >Anyone have any ideas?
-
- Only the (obvious) idea of temporarily turning on a fairly detailed debug
- level and looking at the trace to see what's happening. For example:
-
- a) Be sure you don't have too much traffic queued.
- b) Run uucico with the "-x7" option.
- c) Inspect the uucico trace in c:\Waffle\Admin\uucico
- d) See what was happening towards the end when it hung.
- e) Tell us what it was!
-
- Don't run this way for very long - it generates a lot of trace information.
-
- --
- Nick Langmaid nick@brimbank.apana.org.au Melbourne, Australia +61(3)336-3228
-
-