home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!wupost!crcnis1.unl.edu!moe.ksu.ksu.edu!kuhub.cc.ukans.edu!lanworks!list
- Newsgroups: vmsnet.networks.desktop.pathworks
- Subject: kermit program
- Message-ID: <9212240713.AA09016@gpo.nsc.com>
- From: "JEFFERY CHEW NSEP-CIM, TEL:604-837211 EX 268, FAX604-833894"<vccmep%epmv50.dnet@GPO.NSC.COM>
- Date: 23 Dec 1992 23:13:25 -0800
- Sender: A discussion of Digital's PCSA product <LANWORKS@MIAMIU.BITNET>
- Content-transfer-encoding: 7BIT
- Lines: 26
-
- This may not be a list for such question but I am not sure of any other
- list that talks about KERMIT. If you do know, please let me know.
-
- In the mean while, I do hope someone out there can help me with this.
-
- I try running MS Kermit 3.11 on MS DOS machine using TCP/IP protocol on a
- SMC ethernet card. It will run fine if I use the WD8003E.COM in autoexec
- but when I use WD8003E.SYS in the config.sys file, it does not work. I
- need to have the driver loaded in config.sys file in order for my PC-NFS to
- work. Does anyone know of a way round this problem?
-
- The second problem is trying to upload MS-DOS exe files from VAX to MSDOS
- machine using kermit file transfer. I try to set both kermits to binary
- but after the file has been transfered, it does not run. Any solution to
- this?
-
- p/s : Is there a list for PC-NFS?
-
- You can e-mail me direct so as not to choke up this list.
-
- Merry Christmas & Happy New Year
-
- Rgs,
-
- Jeffery Chew
- vccmep%epmv50.dnet@gpo.nsc.com
-