home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: rec.photo
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!darwin.sura.net!udel!rochester!rit!isc-newsserver!ritvax.isc.rit.edu!ANDPPH
- From: andpph@ritvax.isc.rit.edu
- Subject: Re: Canon Elan - leave leader out?
- Message-ID: <1992Dec29.034449.28130@ultb.isc.rit.edu>
- Sender: news@ultb.isc.rit.edu (USENET News System)
- Nntp-Posting-Host: vaxb.isc.rit.edu
- Reply-To: andpph@ritvax.isc.rit.edu
- Organization: Rochester Institute of Technology
- References: <1992Dec28.175058.1@cudnvr.denver.colorado.edu>,<1992Dec28.213102.18522@jarvis.csri.toronto.edu>
- Date: Tue, 29 Dec 1992 03:44:49 GMT
- Lines: 26
-
- In article <1992Dec28.213102.18522@jarvis.csri.toronto.edu>, acs@csri.toronto.edu (Alvin Chia-Hua Shih) writes:
- >In <1992Dec28.175058.1@cudnvr.denver.colorado.edu> dwing@cudnvr.denver.colorado.edu (Dan Wing) writes:
- >
- >>I've heard of some Nikon 8008s owners sending their cameras back to Nikon to
- >>get them reprogrammed to have the film leader left out when the film is
- >>rewound.
- >
- >>Is this possible with the Canon Elan?
-
- For this particular camera might it be possible to simply trim off a few
- sprocket holes off the leader on the "longer" side of the tongue to fool the
- sensor into stopping the rewinding process while a bit of film still is poking
- out of the casette? I do not have one of these cameras to test out how much of
- the edge would have to be trimmed off or even if the scheme would work.
-
- andy
-
- ..... \
- .....| |.. \
- | Andrew Davidhazy, RIT, High Speed Photography Lab. \
- :____________________________________________________ |'''''''\ \
- : IN%"andpph@ritvax.isc.rit.edu" fax 716-475-5804 |......./ /
- ____________: /
- /
- /
-
-