home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.mac.misc
- Path: sparky!uunet!mcsun!sun4nl!fwi.uva.nl!maarten
- From: maarten@fwi.uva.nl (Maarten Carels)
- Subject: Re: Is SpeedBeep incompatible with Disinfectant?
- Message-ID: <1992Dec21.100521.4728@fwi.uva.nl>
- Sender: news@fwi.uva.nl
- Nntp-Posting-Host: mail.fwi.uva.nl
- Organization: FWI, University of Amsterdam
- References: <1992Dec19.143409.5872@netcom.com>
- Date: Mon, 21 Dec 1992 10:05:21 GMT
- Lines: 26
-
- bskendig@netcom.com (Brian Kendig) writes:
-
- >I tried using SpeedBeep 2.0 recently, and it didn't work -- the
- >"Status" button reported that it had been installed, but something
- >else has changed the way your Macintosh beeps since then,' so it
- >wouldn't do its thing.
-
- >After a lot of init-swapping and rebooting, I traced the problem to
- >the Disinfectant INIT 2.9. SpeedBeep works when this INIT is not
- >loaded, but does not work when it is loaded. This is especially odd
- >because [1] Disinfectant shouldn't be messing with SysBeep() and [2]
- >it loads _before_ SpeedBeep, anyway.
- It's documented in the online manual of Disinfectant. Version 2.0.6 (of
- SpeedBeep) is supposed to fix the problem.
-
- --maarten
-
- Disclaimer: I don't even know what SpeedBeep is supposed to be doing. I only
- read manuals sometimes.
-
-
- --
- In real life: Maarten Carels
- Computer Science Department
- University of Amsterdam
- email: maarten@fwi.uva.nl
-