home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky comp.sys.mac.hardware:24797 comp.sys.mac.apps:18936 comp.sys.mac.misc:21032
- Path: sparky!uunet!portal!cup.portal.com!David_Anthony_Guevara
- From: David_Anthony_Guevara@cup.portal.com
- Newsgroups: comp.sys.mac.hardware,comp.sys.mac.apps,comp.sys.mac.misc
- Subject: Rocket 33 and VersaTerm Pro problems
- Message-ID: <72245@cup.portal.com>
- Date: Tue, 22 Dec 92 22:31:22 PST
- Organization: The Portal System (TM)
- Distribution: usa
- Lines: 17
-
- Help! I have a Radius Rocket 33 installed on my Mac IIci. I seem to have
- a problem with VersaTerm Pro and the Rocket. I use VersaTerm Pro 3.5.3 to
- access my VAX thru a Practical Peripherals 9600A modem. If the Rocket is
- active, characters displayed to my screen seem to get dropped. Transmission
- to the VAX seems fine. I can type any command and the system will respond.
- The display just seems to be messed up. Disabling the Rocket seems to clear
- the problem. I have tried using a modem cable that has hardware handshaking.
- I enable hardware handshaking on the modem with: AT&F&C1&D0S95=44. VersaTerm
- Pro still seems to be losing characters. Have any of you Rocket users seen
- this problem? Have you found a solution? Radius says to use Microphone or
- White Knight, but I really can't change right now. Any help would be
- appreciated. FYI, the system is a Mac IIci, 8Mb RAM (on motherboard), 32 Mb
- on Rocket. System 7.01 with tuneup installed. Assorted inits and cdevs.
- Thanks again for any help you can give me!
-
- -- David Guevara,
- Internet: David_Anthony_Guevara@cup.portal.com
-