home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.ibm.pc.hardware
- Path: sparky!uunet!destroyer!cs.ubc.ca!newsserver.sfu.ca!sfu.ca!gting
- From: gting@fraser.sfu.ca (Gabriel Sii Kuok Ting)
- Subject: Re: Trouble with WD-7000ASC and Gravis UltraSound
- Message-ID: <gting.725745325@sfu.ca>
- Sender: news@sfu.ca
- Organization: Simon Fraser University, Burnaby, B.C., Canada
- References: <d2henan.725726208@dtek.chalmers.se>
- Date: Wed, 30 Dec 1992 19:55:25 GMT
- Lines: 31
-
- d2henan@dtek.chalmers.se (Andreas Henning) writes:
-
- >A friend of mine is having lots of trouble installing a Gravis
- >UltraSound in his machine. The trouble is the WD-7000ASC
- >SCSI card, which uses the same memory addresses.
-
- Same memory addresses? Hmm... I'm sure you can try chacnging the address on
- the SCSI card too, right? I've got a Gravis Ultrasound, WD-7000 FASST (which
- is almost the same as the ASC) AND a Thunderboard in the same machine and all
- is working perfectly. I've got my GUS on 240h, the TB on 220h and the SCSI
- controller at its default 320h. Have you checked the DMA channels on the
- two cards? My GUS uses dma 7, while the WD takes up DRQ 6 and DACK 6.
- E-mail me if you need help on the jumpers. I've got a brief dox on the jumpers
- of both the WD-7000ASC and FASST (similar jumpers)
-
- >He can't get it to work even if he changes IRQ and Port Address
- >on the GUS. (IRQ 3,5,11) and Port Base Address (220h-260h) .
-
- >Has anyone had similar experience with the GUS or any other card?
- >He gets strange Memory Parity Errors all the time.
-
- >Thanks in advance,
-
- >Andreas Henning -- d2henan@dtek.chalmers.se
- > Chalmers University of Technology
-
- --
- This is a sig. This is only a sig. What the heck did you think it was anyway?
-
- Flames to /dev/null. Nonsense to gting@sfu.ca.
- Merry Christmas!
-