home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky comp.sys.amiga.datacomm:8358 alt.sources.amiga.d:16 comp.dcom.modems:18481
- Newsgroups: comp.sys.amiga.datacomm,alt.sources.amiga.d,comp.dcom.modems
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!cs.utexas.edu!wupost!csus.edu!netcom.com!gerg
- From: gerg@netcom.com (Greg Andrews)
- Subject: Re: Problems using Worldblazer with amiga UUCP
- Message-ID: <1992Dec25.012453.27057@netcom.com>
- Summary: Use &F3 and pay attention to the S51 and S58 settings.
- Keywords: Amiga uucp worldblazer telebit serial port
- Organization: Netcom Online Communications Services (408-241-9760 login: guest)
- References: <BzIqxJ.4CG@hico2.westmark.com>
- Date: Fri, 25 Dec 1992 01:24:53 GMT
- Lines: 22
-
- kak@hico2.westmark.com writes:
- >
- >My brother is having a lot of problems getting his new Worldblazer
- >to work with his Amiga. As I understand it, he has problems
- >getting incoming calls, especially when talking to the modem at 19200.
- >(but we THINK the Amiga serial port *should* be able to handle > 9600
- >baud rates). On this side, it looks like I'm not receiving all of the
- >stuff he's supposed to be sending. And problems with outgoing calls:
- >
-
- Use the &F3 configuration in the modem. For port speed, take a look at
- the S51 register setting, and for flow control look at the S58 register
- setting. Set your Amiga software to be compatible with those settings.
-
- -Greg
- (Telebit Engineer)
- --
- ::::::::::::::::::: Greg Andrews gerg@netcom.com :::::::::::::::::::
- ObGuindon: "The way the economy works, if a man has ten carp
- and he gives four to the government, no matter how
- you slice it, he's still stuck with six carp."
- :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
-