home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!math.fu-berlin.de!uni-paderborn.de!not-for-mail
- From: laire@klee.uni-paderborn.de (Ralph Schmidt)
- Newsgroups: comp.sys.amiga.applications
- Subject: Re: ToolManager & 4000
- Date: 30 Dec 1992 20:19:30 +0100
- Organization: Universitaet Paderborn, Germany
- Lines: 25
- Message-ID: <1hsso2INNfn1@klee.uni-paderborn.de>
- References: <1hrdmdINNpkb@usenet.INS.CWRU.Edu> <C03512.14q@hermes.hrz.uni-bielefeld.de>
- NNTP-Posting-Host: klee.uni-paderborn.de
-
- markus@techfak.uni-bielefeld.de (Markus Illenseer) writes:
-
- >In article <1hrdmdINNpkb@usenet.INS.CWRU.Edu>, cc069@cleveland.Freenet.Edu (Daniel Sternklar) writes:
- >|>
- >|> Hello Does ToolManager work ok on the 4000?
- >|> At times on bootup the toolmanager handler fails.
- >|> This has happened on two different 4000
- >|> -Dan
- >
- > I don't see any reason why this happen. I think the problem is WB3.0
- > rather the A4000. But even then, i am surprised TM doesn't work on
- > WB3.0....
- > Unfortunately the author (Stefan Becker) can not read this group
- > for the next two months, i try to contact him anyway.
-
- > Good luck
-
- TM 2.0 runs without any problems on my A4000 and also on 2 friends
- A4000. I use a PRIORITY of 120 in the WBSTARTUP.
-
- Regards...
-
- --
- Ralph Schmidt laire@uni-paderborn.de
- University of Paderborn (Germany)
-