home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!wupost!usc!news.service.uci.edu!cerritos.edu!wilbur!batpad!mike
- Newsgroups: comp.os.msdos.desqview
- Subject: Re: QEMM and Windows problem
- Message-ID: <mike03610921127173005@batpad.lgb.ca.us>
- From: mike@batpad.lgb.ca.us (mike batchelor)
- Date: Sun, 27 Dec 92 17:30:05 PDT
- References: <1992Dec18.195216.102@vms.huji.ac.il>
- Distribution: world
- Organization: The Batchelor Pad
- Lines: 38
-
- gilf@vms.huji.ac.il (Gil Freund) writes:
- >
- > When I start Windows 3.1, the progrma will display a garbled logo screen,
- > but then the desktop appears fine. Windows will act fine until I try to
- > launch a windowed DOS session, the screen then will trash up, allthough
- > the system still works fine (I can exit normaly, even if I can't make
- > out the screen). I use the 800x600 driver.
- >
- > Any ideas?
-
- If you haven't done it already, add X=B000-B7FF to your QEMM386 device
- line.
-
- If you are running Stealth (ST:M or ST:F on your QEMM386 device), then
- try X=C000-C1FF or X=C000-C5FF in addition to the X=B000-B7FF. Use
- the smaller exclude given first if it works.
-
- If none of that works, remove ST:M or ST:F and try again. If that
- works, you need to troubleshoot the conflict your driver and hardware
- has with the Stealth feature. Send a note to support@qdeck.com and
- request stealth.tec, and follow the procedure outlined there.
-
- Reoptimize your system with the new QEMM386 device line if one of the
- above suggestions fixed the problem.
-
- If all of the above fails, then more information is needed:
-
- SVGA card used, brand, model, VGA chipset.
- Which driver are you using, the Windows driver, or the OEM driver
- that came with the card?
- Machine brand, model, BIOS, chipset.
- Contents of autoexec.bat and config.sys.
-
-
-
- [] ---
- [] Mike Batchelor <> Long Beach, California
- [] mike@batpad.lgb.ca.us <or> mikebat@qdeck.com
-